Unlock Your Device: iCloud DNS Bypass Explained and Tested, Plus Easy Alternatives On Apple iPhone SE (2020)

Have you bought a used iPhone or iPad with an active iCloud Activation Lock? Or perhaps you have an Apple device but cannot remember your iCloud password? Without activating iCloud, you cannot utilize locked devices in either scenario.

You might try contacting Apple customer service, but they won’t be able to assist you without user identification directly. Even after the Apple iPhone SE (2020) device has been authenticated, you will still be bombarded with inquiries, and they may even want the original iOS device payment receipt.

One of the greatest free solutions to prevent these issues is to unlock your Apple iPhone utilizing iCloud DNS Bypass. Read on to know more in this iCloud DNS Bypass Guide.

Part 1: How Can We Use iCloud DNS Bypass for iOS Devices?

After a factory reset or restoration, every time you set up your iOS device, it will send an activation request to Apple’s servers. Apple responds to your request and displays your device’s status.

Additionally, if the Find My iPhone feature of your device is enabled, an iCloud Activation Lock screen will appear and prompt you for your iCloud account login information. The iCloud DNS Bypass can assist you if you forget your login information (Apple ID or password) or purchase a used device with an iCloud lock activated. It is a free approach to unlocking iCloud.

The readable names are transformed into numerical IP addresses via the Domain Name System (DNS). To launch the program, it makes use of a DNS server that serves as a host.

Use DNS to get around iCloud Server IP Address

You may first just ignore the iCloud DNS on your Apple iPhone SE (2020) or iPad. The procedure is easy. Remember that the process must be completed by inserting the SIM card into your Apple iPhone SE (2020).

• Step 1. Turn on your Apple iPhone SE (2020), then configure it according to the on-screen instructions.

• Step 2. Select your language and nation. Click Continue to access the Wi-Fi settings screen after that.

• Step 3. If prompted, click the I icon next to the Wi-Fi area.

• Step 4. Click Connection Settings > Forget this Network to disconnect from the Wi-Fi network.

• Step 5. When asked for a DNS server IP address, tap the I symbol to unlock the iCloud activation lock. Here is a list of places for your information:

• USA: 104.154.51.7

• 155.28.90 Europe

• Africa: 35.199.88.219

• Asia: 104.155.220.58

• 189.47.23 Australia and Oceania

• It is 78.100.17.60 on other continents.

• Step 6. Turn on Wi-Fi and select the Wi-Fi network you wish to connect to by tapping the Back button on the left side of the screen. Enter your passcode after that.

• Step 7. When you click Next Page > Back, the iCloud bypass page will appear.

• Step 8. Use your device and configure your apps.

Use iCloud DNS Bypass Crash

• Step 1. The procedures below will help you delete iCloud after DNS bypass if you cannot utilize some features on your Apple iPhone SE (2020).
• Step 2. Tap Menu > Applications after attempting the aforementioned technique.
• Step 3. To restart your smartphone, scroll down and tap the Crash option.
• Step 4. Select “Language and Country” > Select a Wi-Fi network, click Home, More Wi-Fi Settings, Configure Proxy, and then Manual.
• Step 5. In the Server section, delete the existing HTTP address before entering 30 different emojis. Type 8888 into the Port area, then click Save at the top.
• Step 6. To access the Unlock screen, tap Back > Next. To unlock the Apple iPhone SE (2020) device, press the Home button.
• Step 7. When the Home screen appears, tap the Language choice.

Part 2: The Best iCloud DNS Bypass Alternatives to Unlock Your Apple iPhone SE (2020)/iPad/iPod Touch (Easy and Efficient)

Only if you bought a secondhand iPhone with an activation lock or want to restore the Apple iPhone SE (2020) device but forgot that Find My iPhone was ever turned on do you need Dr.Fone - Screen Unlock (iOS) . Dr.Fone - Screen Unlock (iOS) is the most promising and user-friendly product of its sort currently available. With the help of this application, you can simply fix the iCloud activation issue. You don’t need to be an expert in utilizing the application because it is simple and intuitive.

Using Dr.Fone - Screen Unlock, you can get rid of the iCloud activation lock. Launch Dr.Fone and choose “Remove Active Lock” and “Unlock Apple ID” to unlock your iCloud. It still works if you have a used iPad or iPhone.

Dr.Fone - Screen Unlock (iOS)

Remove iCloud Activation lock without Password in Minutes

• Remove Apple ID/iCloud Account efficiently.
• Save your Apple iPhone SE (2020) quickly from the disabled state.
• Free your sim out of any carrier worldwide.
• Bypass iCloud activation lock and enjoy all iCloud services
• Works for all models of iPhone, iPad, and iPod touch.
• Fully compatible with the latest iOS.

4,008,671 people have downloaded it

Here’s a step-by-step guide on how to use it

Step 1. Installing Dr.Fone on your smartphone and selecting Screen Unlock from the available options are the first steps in the procedure. You will note that there is a “iCloud Activation Lock Removal” option, among others, when you first use the Screen Unlock function. Simply clicking on it is all that is required.

Step 2. Before the bypassing process, please tape “Start”.

Step 3. After reaching the ‘Start’ page, Your Apple iPhone SE (2020)’s specific information will be detected to determine the appropriate operation process. Ensure that the data cable is properly connected during this process. Jailbreaking is required for iOS devices running 12.0 to 14.8.1, but for iOS 15.0 to 16.3, simply enter DFU mode twice and proceed to unlock. For detailed instructions on unlocking, you can visit this detailed guide about iCloud Activation Lock Removal.

Step 4. Now we’re bypassing the activation lock, soon your Apple iPhone SE (2020) will work without the activation lock.

Part 3: FAQs

1. When Do We Require iCloud DNS Bypass?

We require it when our carrier locks our phone or when we buy a used phone and cannot use it because of an iCloud activation lock. The use of iCloud DNS bypass enables temporary access to the features and functionality of an iCloud-locked device. Domain Name Server, or DNS for short, serves the function of converting your domain names into IP addresses.

2. What Can iCloud DNS Bypass Do for Us?

When you need an urgent functioning solution for a locked iPhone, using iCloud DNS bypass is helpful since it gives you temporary access to all the features and configuration of an iCloud-restricted device. DNS, or domain name server, converts your domain names into IP addresses.

3. What are the Pros & Cons of iCloud DNS Bypass

This approach can be helpful, but it does have advantages and pitfalls of its own. These advantages and disadvantages are broken down as follows:

Pros

• You may use it without installing any software on the Apple iPhone SE (2020) device, since you can do it in the Wi-Fi settings.
• The internet, camera, and games can all be used after the gadget has been engaged, making it simple to access.
• Utilizing this approach is cost-free.

Cons

• This technique only partially unlocks the Apple iPhone SE (2020) device and represents a hack.
• The iCloud DNS bypassing technique has occasionally been reported as not working by users.

Conclusion

Now you have read all about iCloud DNS bypass, what is iCloud bypass DNS, whether DNS bypass is free, and how to iPhone DNS bypass, it is time to implement all the solutions and bear in mind that all DNS Bypass solutions are 100% free. Dr.Fone - Screen Unlock (iOS) is also a great tool to bypass screen lock, even if you don’t have any tech skills.

How to Factory Reset iPad or Apple iPhone SE (2020) without iCloud Password or Apple ID?

If you are an iPad or Apple iPhone SE (2020) owner and are looking to reset your iPad or Apple iPhone SE (2020) without knowing the passcode, you do not need to worry anymore. Most gadget owners already know how to factory reset their phones. But in cases where you have forgotten your Apple ID password or passcode and want to reset your iPad or Apple iPhone SE (2020), it can be done via various ways and techniques. Here, we shall discuss a few of them.

In this article, you shall find multiple ways by which you can effectively factory reset iPad or Apple iPhone SE (2020) without iCloud password and get a clean slate to work on. A factory reset will wipe all the data off of your iPad or Apple iPhone SE (2020), so be mindful of that. The methods are all quite simple yet effective in producing the desired result. Without further ado, let us begin!

Part 1: How to Factory Reset iPad or Apple iPhone SE (2020) without Apple ID by Removing Apple ID?

If you wish to factory reset the iPad or Apple iPhone SE (2020) without an Apple ID password or iTunes, one simple way to do it is via third-party application software. A quite wonderful tool in this regard is the Dr.Fone - Screen Unlock tool. It lets its users remove multiple types of locks from screens on several different devices. Using an external tool saves users from various kinds of troubles that may arise along the way.

The Dr.Fone program is a highly useful and recommended tool for unlocking phone screens. It supports a wide range of phone models and multiple brands, including Apple, Samsung, Xiaomi, Huawei, LG, etc. Users can easily remove screen locks of multiple kinds. In addition to that, Dr.Fone also:

• It saves a lot of time and effort for the users and does its job quickly.
• Supports many brands and all the latest versions of iOS and Android.
• Protects the data of consumers, making it a trusted source worldwide.
• It is relatively easy to use, with a user-friendly interface.

safe & secure

To factory reset the iPad or Apple iPhone SE (2020) without Apple ID using Dr.Fone, install the program on your computer, and proceed as mentioned below.

Step 1: Launch and Connect the Program to iPad or Apple iPhone SE (2020)

Launch the Dr.Fone Screen Unlock app on your computer and connect your iPad or Apple iPhone SE (2020) with the help of a data or a USB cable.

Step 2: Choose Option

On the main interface of the program, you will see various options to choose from. Click on the “Screen Unlock” button visible there.

Step 3: Select Unlock Option

On the next screen, you will see multiple options. Choose the “Unlock Apple ID” one.

Step 4: Establish a Trusted Connection

Now, tap the “Trust” button on your iPad or Apple iPhone SE (2020) to establish a trusted connection with the computer to proceed further.

Step 5: Reset iPad or Apple iPhone SE (2020)

Then, on your computer screen, click on “Unlock Now.” Confirm the action on the appearing dialogue box. Next, follow the instructions visible on the screen to reset your iPad or Apple iPhone SE (2020).

Step 6: Remove Apple ID

Dr.Fone will begin the process of unlocking your iPad or Apple iPhone SE (2020). Do not disconnect the iPad or Apple iPhone SE (2020) during this process. Once the process is completed, reboot your iPad or Apple iPhone SE (2020), and you shall be able to sign in with a new Apple ID.

safe & secure

Part 2: Factory Reset iPad or Apple iPhone SE (2020) without iCloud Password

In case you are asking yourself if it is possible to reset your iPad or Apple iPhone SE (2020) without an iCloud password, the answer is yes. If you want to learn how to factory reset an iPad or Apple iPhone SE (2020) without an iCloud password, an easy way of doing so is with an iTunes or Finder.

For Mac users with macOS Catalina 10.15 or later, they can complete the process with Finder’s help. Windows users and macOS users with older versions can use iTunes. Before restoring the iPad or Apple iPhone SE (2020) without an iCloud password, you are required to put it into Recovery mode. For that, you need to follow the steps provided as follows.

Step 1. Turn off your iPad or Apple iPhone SE (2020)

• On an iPad or Apple iPhone SE (2020) with Face ID: Make sure your iPad or Apple iPhone SE (2020) is not connected with your computer. Press and hold the Top and Volume Down button to allow the power slider to appear on the screen. Drag the slider to turn off the Apple iPhone SE (2020) device.
• On an iPad or Apple iPhone SE (2020) with Home Button: Make sure your iPad or Apple iPhone SE (2020) is not connected to a computer. Press the Side or Top button to allow the power slider to enumerate on the screen. Once it is done, drag the slider to turn off the Apple iPhone SE (2020) device.

Step 2. Enter Recovery mode

• On an iPad or Apple iPhone SE (2020) with Face ID: Connect your device to a computer. Hold the Top button for leading into the recovery mode while connecting it with the computer.
• On an iPad or Apple iPhone SE (2020) with a Home button: Connect your iPad or Apple iPhone SE (2020) to your computer. Keep holding the Home button while connecting it with the computer until the recovery mode screen appears on the front.

Step 3. Open iTunes or Finder on the computer

Open iTunes and access your iPad or Apple iPhone SE (2020) through the iPad or Apple iPhone SE (2020)’s icon present on the screen’s upper-left corner. With Finder on Mac, locate your iPad or Apple iPhone SE (2020) in the sidebar of its window. Tap it.

Step 4. Restore your iPad or Apple iPhone SE (2020) and set it up

The screen displays an option of ‘Restore’ or ‘Update’ for the iPad or Apple iPhone SE (2020). Tap on the option of ‘Restore’ to let the platform download the software into the iPad or Apple iPhone SE (2020) within the recovery mode. Then set it up as a new device.

Part 3: How to Reset iPad or Apple iPhone SE (2020) without Apple ID via the Settings App?

Another way of resetting your iPad or Apple iPhone SE (2020) is via the Settings app present on your device. You can unlock a disabled iPad or Apple iPhone SE (2020) or remove all data by executing a total wipe of the iPad or Apple iPhone SE (2020) using Settings. However, before starting, please ensure that your iPad or Apple iPhone SE (2020) is connected to the internet and the “Find My iPhone” feature is disabled on it. You will also need to know the passcode of your iPad or Apple iPhone SE (2020) to proceed with this method.

Once you have done all of that, follow the steps given below.

1. Open “Settings” on your iPad or Apple iPhone SE (2020).
2. Go to “General.”
3. Navigate to the “Reset” option and click on it.
4. Select the “Erase All Content and Settings” option.
5. Type in your passcode to confirm and proceed. This will wipe all the data on your iPad or Apple iPhone SE (2020).

Based on the version of your iOS, you might be asked to enter your Apple ID password too. It will also ask for the Apple ID password if the “Find My iPhone” feature is enabled on your device. Hence, the process will not be successful without it, and your iPad or Apple iPhone SE (2020) will go to Activation Lock. Therefore, Dr.Fone is a simple, recommended, and reliable way of resetting the iPad or Apple iPhone SE (2020) without an Apple ID, saving much of the troubles.

Conclusion

There can be multiple reasons for resetting your iPad or Apple iPhone SE (2020). Now you know how to factory reset the iPad or Apple iPhone SE (2020) without Apple ID. You can follow any of the above-mentioned methods to get the desired results as best suited to your needs. Some might work, and some might not. The Dr.Fone – Screen Unlock tool is recommended, as it is the most efficient among all the other methods. Try it to get proficient outcomes.

safe & secure

Effective Ways To Fix Checkra1n Error 31 On Apple iPhone SE (2020)

Apple distinguishes itself as a leading smartphone manufacturer by implementing rigorous security protocols. These measures pose challenges for users seeking to jailbreak their iOS devices. Such actions grant users the capability to remove the restrictions enforced by Apple on their devices.

Serving as the primary tool for this purpose, Checkra1n emerges as a popular choice. Nevertheless, similar to any other tool, Checkra1n may face a range of issues, among which Checkra1n Error 31 is notably notorious. This guide aims to help you address Checkra1n Error 31. Moreover, it will introduce a powerful alternative to Checkra1n jailbreak iOS devices.

Part 1. Figuring Out All Possible Reasons for Checkra1n Error 31

Understanding the reasons behind Checkra1n Windows Error 31 is essential in resolving this issue. The reason can relate to the software and hardware aspects of running Checkra1n. Here are some of the reasons why you are encountering Checkra1n error 31:

1. Temporary Computer Issues: As Checkra1n is a computer-based tool, issues within your computer can cause the error code 31. These issues can be insufficient resources, compatibility issues, or temporary glitches.
2. Mismatched Checkra1n Version: When jailbreaking an iOS device, you must use the right version of the tool. Using incompatible versions of Checkra1n can lead to issues such as error code 31.
3. Issues with USB Connection: A major cause behind Checkra1n error 31is the unstable or faulty USB connections. If your device is not properly connected, it will lead to the failure of the jailbreak process.
4. **Device Compatibility Issues:**Apple has introduced many measures to ensure that newer devices are hard to jailbreak. That’s why if you use the latest iOS device, there is a high chance it is incompatible with Checkra1n.
5. **Security Software Interference:**In rare cases, the security or antivirus software installed on your system can interfere with the working of Checkra1n. Similarly, the Windows firewall can sometimes flag Checkra1n as a virus, disturbing the jailbreaking process.

Part 2: [Top Fixes] Resolve Checkra1n Error 31 to Jailbreak iOS Device

Encountering errors like Checkra1n jailbreak Error 31 is a typical occurrence in the jailbreaking process. Fortunately, there’s no cause for concern, as there are various solutions readily accessible to diagnose and address this particular error. Discussed below are the top 6 fixes to streamline your iOS jailbreaking process:

Fix 1. Wondershare Dr.Fone – Screen Unlock (iOS) Providing a Direct Jailbreaking Solution

While Checkra1n is widely employed for jailbreaking iOS devices, it has notable limitations. This is especially the case concerning compatibility with the latest iOS versions. Therefore, we recommend considering a dependable alternative like Wondershare Dr.Fone. It offers iOS users a user-friendly approach to conducting jailbreaks on their devices.

Working as a dependable companion for iPhone users, Dr.Fone simplifies the jailbreaking process. It especially benefits users grappling with iOS security locks, particularly iCloud activation locks. Notably, Dr.Fone stands out for its compatibility with the latest iOS 17 and iPhone 15 models.

Prominent Features of Wondershare Dr.Fone

1. You can bypass all sorts of iOS screen locks, from passcodes to Face IDs.
2. Besides unlocking iCloud Activation Lock, it is also an expert in removing SIM locks from the carriers.
3. If you have forgotten your iTunes backup encryption password, Dr.Fone can remove it without causing data loss.

Steps To Bypass iCloud Activation Lock via Wondershare Dr.Fone

By combining Dr.Fone with the jailbreaking process, users can effectively bypass the iCloud Activation Lock. Detailed instructions are provided below to bypass the iCloud Activation Lock bypass using Dr.Fone:

• Step 1. Commence the Procedure by Activating Dr.Fone

Start by downloading and opening the latest edition of Wondershare Dr.Fone. After completing this step, go to the “Toolbox” section within Dr.Fone and click “Screen Unlock.” Choose “iOS” as your device type, and head to select the “iCloud Activation Lock Removal” option. Now, begin the procedure by selecting “Start” and ensure your device remains connected to the computer throughout this stage.

• Step 2. Jailbreak Your iOS Device

Now, proceed to check if your device is CDMA or GSM. A GSM device will remain the same after iCloud Activation Lock removal. On the other hand, a CDMA device will lose all cellular functionalities. After that, you need to tap “Unlock Now” and agree with the warning by tapping “Got it!” Afterward, you will need to jailbreak your device, for which follow these below-given steps:

1. On a computer with Windows 7 or higher, download checkn1x-amd64.iso and rufus.exe. Connect a USB with at least 2 GB storage to the computer. Next, open the Rufus file and choose “checkn1x-amd64.iso” by clicking “Select.”

2. Now, click “Start,” and on the pop-up window, choose “Write in DD Image Mode.” Then, click “OK” and wait for the process of writing image data to complete. Once completed, tap “Close” and restart your computer with the USB plug-in.

3. Press the F12 or relative boot key to access the Boot Menu when the computer restarts. Within the “Boot Menu,” choose the USB and connect your iOS device to the computer. Now, use the arrow keys to move to the “Options” button and press Enter.

4. You must now move to the “Allow untested iOS/iPadOS/tvOS versions” option and hit “Enter.” Follow it by moving to the “Skip All BPR Check” option and pressing “Enter” again. Afterward, move to the “Back” option and use “Enter” to return to the main screen.

5. Once back on the main screen, select “Start” to initiate jailbreaking. For CheckN1x to jailbreak your device, you need to put the Apple iPhone SE (2020) device into DFU Mode. Now, tap “Next” to put your device into Recovery Mode.

6. Once your device is in Recovery Mode, tap “Start” and follow the on-screen guidelines to put it into DFU Mode. When your device enters DFU Mode, Checkn1x will automatically jailbreak it. Finally, select “Finish” and remove the USB to complete the process.

• Step 3. Complete the iOS Activation Lock Bypass Process

Removing the Activation Lock will start as soon as your device is jailbroken. You can follow the progress on the screen, and once it is complete, tap “Done” to conclude the process.

Fix 2. Try Restarting iOS or Computer Device

Sometimes, temporary glitches or bugs within your iOS device or computer can cause the Checkra1n Error 31. The most effective and simple solution in this case is to restart your devices. This simple process removes all temporary glitches and resets all processes. Here is how you can restart your iOS device and computer:

1. Windows PC

Instructions. Click the “Start” button on your Windows PC from the bottom left corner. Here, tap the “Power” icon and select “Restart.”

2. MacBook

Instructions. When using a Mac, click the “Apple” logo from the top left corner. Press “Restart” from the drop-down menu to reboot your Mac.

3. iPhone/iPad

Instructions. Press the “Side” and any “Volume” buttons to access the Power Slider screen. Now, move the slider to the right to turn off your device. After waiting some time, press the “Side” button to turn on your iOS device.

Fix 3. Download New Checkra1n Version

Crucial for a successful jailbreak is carefully selecting the appropriate Checkra1n version. Compatibility varies across devices, making it essential to choose the version that suits your device. Error 31 issues are likely linked to the specific Checkra1n version in use. In such instances, the recommended solution is to experiment with alternative versions.

Fix 4. Install iOS Firmware From iTunes and Retry Jailbreaking

When encountering Checkra1n jailbreak, error 31 may be attributed to the iOS version on your device. In such cases, the optimal resolution involves reinstalling the iOS version through iTunes. Follow the steps below to personally choose the IPSW file and employ iTunes for the installation on your iOS device:

• Step 1. Access the ipsw.me website using a web browser and download the compatible IPSW file for your iOS device. Before installing, ensure that the “Find My” service is disabled.

• Step 2. Connect the iOS device to the computer and wait for iTunes/Finder to detect it once all requirements are satisfied. For instance, if you have a Mac with the operating system before macOS Catalina, access the “Summary” tab by clicking the Apple iPhone SE (2020) device icon within iTunes. While holding the “Shift” key on Windows or the “Option” key on Mac, click “Restore iPhone.”

• Step 3. You will be asked to select the IPSW file. Choose the file you downloaded and follow the on-screen instructions to complete the installation process. Once complete, re-try the jailbreaking and see if error 31 is resolved.

Fix 5. Consider Using Other Options in Checkra1n

If the reason behind Checkra1n error 31 is the Apple iPhone SE (2020) device incompatibility, Checkra1n provides an inbuilt way. When jailbreaking a device, Checkra1n allows you to select the “Untested versions” option. While employing this option, you can jailbreak the Apple iPhone SE (2020) device with iOS versions still not tested for jailbreaking. Here is how you can select these options in an attempt to jailbreak your device:

Instructions. To get a clean start, reboot your computer and iOS device and launch the Checkra1n app. Now, click the “Options” and select the “Untested Versions” and “Safe Mode” options. Then, try jailbreaking your device and see if error 31 is resolved.

Fix 6. Try a Special Method While Using Checkra1n

At times, the solutions you are looking for can be found among the experiences of fellow users. We found a Reddit post in our search to find solutions to Checkra1n Error 31. In this post, a Reddit user explained a hack he had found to solve error 31 when jailbreaking using Checkra1n.

Remember that this hack includes a specific Checkra1n version and experience that specific user. While you can emulate the experience, the results aren’t guaranteed. Here is what that user tried for successful jailbreaking using Checkra1n:

• Step 1. Download and install the Checkra1n version 0.10.2 beta on your computer. Now, connect your Apple iPhone SE (2020) to DFU Mode to the system. Initiate the jailbreaking process until the “Right before Trigger” option appears.

• Step 2. The user suggests you unplug the cable and re-plug it after waiting for 5 to 7 seconds. According to the user, this action should do the trick. To get out of DFU Mode, press and hold both buttons (Home + Lock) for 10 seconds and go on to release the home button.

Bonus. Jailbreak iOS Using Mac: A Simple Guide To Refer To

Looking for a tool to jailbreak an iOS device on a Mac? Wondershare Dr.Fone has you covered there, as it also provides a comprehensive guide to jailbreaking an iOS device from Mac. You will need to download the Checkra1n tool and a USB cable to connect your Apple iPhone SE (2020). Once you have both, use the following steps to jailbreak your device from Mac:

• Step 1. Begin by downloading the .dmg file of Checkra1n and installing it within your Mac’s applications. Now, link your iOS device to the Mac and go to Applications, click “Checkra1n,” and access “Contents.”

• Step 2. Tap “macOS” and go to “Checkra1n_gui Terminal file” to detect the Apple iPhone SE (2020) device. Now, move ahead by tapping “Start,” you will be led to the screen with instructions for putting the Apple iPhone SE (2020) device into DFU Mode.

• Step 3. Tap “Next,” put your device into DFU Mode, and press “Start.” Once the Apple iPhone SE (2020) device is in DFU Mode, the jailbreaking process will commence. When it is complete, and your device is jailbroken, tap “Done” to conclude the process.

Conclusion

In wrapping up this guide, those seeking to customize their iOS devices can turn to jailbreak. Checkra1n stands out as a favored option for this procedure, but dealing with Checkra1n Error 31 can be an irritating ordeal. The optimal solution is opting for an alternative, such as Wondershare Dr.Fone. This tool offers comprehensive textual and video guides, aiding users in successful jailbreaks.

Tips: Are you searching for a powerful Activation bypass tool? No worries as Dr.Fone is here to help you. Download it and start a seamless unlock experience!